Welcome to the official website of hanzhong burt machinery equipment manufacturing co., LTD.!

Navigation
Contact
Hot Line
Fax:
Address:
Location:主页 > 英文版 > News > Problem solving >
What reason is processing efficiency of small-sized mill low
Auther: Pubdate:2019-04-09
Too much feeding material, material grinding not through;
 
Uneven feeding thickness at both ends of feeding roller;
 
The drawing Angle of grinding roller is not right;
 
The tooth Angle is not in the right direction when the roller is installed.
 
Grinding roller drawing tooth Angle with blunt;
 
Large rolling distance of grinding roller, light grinding; The two ends of the grinding roller do not have the same rolling distance.
 
Screen mesh is too dense;
 
Large clearance between brush and screen, poor screening effect;
 
Wheat moisture content exceeds the standard (should be 14.5%-15%), grinding materials are not easy to screen;
 
The triangle belt of the main motor is loose and slippery, and the grinding speed is low;